Y60

Y60

Why We Made This
 
  • A new build should feel new
  • 3-Piece panoramic glass with 3-times more satisfying plastic wrap removal.
  • We know how much you just spent on that GPU, so we threw in the riser cable.
  • Cold floor cooling keeps thermals lower than a partly cloudy day with a light breeze and you without your jacket.
  • Check out this crown molding right there.

Product Features

Panoramic Views

No corner pillar. The Y60 features a 3-piece panoramic tempered glass design for the ultimate photo and display potential. See your build the way it was meant to be seen from the left or right side of your desk with a simple turn.

Exclusively Vertical GPU Mounted

Why would you want to see your graphics card any other way?

Included PCIE 4.0 Riser Cable

A protective riser cable canopy integrates beautifully into the case, allowing for half-height PCIE cards behind the throne of the vertical graphics card. The protective shroud is the first of its kind, made specifically for the Y60.

Antechamber Construction

Segment cables from thermal components and turn your PC into a work of art.

Cold Floor Cooling

Eliminate hot spots with sweeping lateral vents from fans tastefully tucked into the basement of the Y60.

Included Fans

The three pre-installed Flow FE12 fans with fluid-dynamic bearings provide whisper-quiet operation.

Tech Specs

Type Dual Chamber Mid-Tower ATX Case
Volume 60L
Case Dimensions 456mm (L) x 285mm (W) x 462mm (H)
Case Weight 9.6 kg
Case in Box Dimensions 535mm (L) x 372mm (W )x 540mm (H)
Case in Box Weight 11.3 kg
Case Materials Tempered Glass, Steel, ABS
Color White/Black, Black/Black, Red/Black
Motherboard Support EATX, ATX, mATX, ITX
Power Supply ATX up to 235mm in length 
Video Card Max Dimensions 375mm length, 75mm thick (60mm or less recommended for best cooling)
Fan Support Side: 2x 120/140mm
Top: 3x 120mm
Rear: 1x 120mm (1x 120mm, 1300 RPM included)
Bottom: 2x 120mm/140mm (2x 120mm, 1300 RPM included) 
Radiator Support Side: 120, 140, 240, 280mm up to 150mm thick
Top: 120, 240, 360mm up to 30mm thick
Rear: 120mm 
CPU Cooler Height 160 mm*
Storage 2x 3.5" HDD or 4x 2.5" SSD
Expansion Slots 3 + 6 half-height
PCI Express Riser 4.0 x 16 (included)

 

INTERFACES

 
Front USB 3.0 2
Front USB 3.2 Gen 2 Type-C 1
Audio/Mic Jack 1
Dust Filters Bottom, Side, Top
RGB Lighting None

* When using an air cooler rather than liquid cooler, HYTE recommends the installation of 2 additional intake fans (not included) on the side mount of the Y60 for optimal airflow.

Customer Reviews

13 Reviews Write a Review
5
  • Love the Change
    5

    This case is beyond what I was expecting. Finally got away from the over crowded 011D scene. The Y60 is such a great case for the value. I modified this case a bit. I removed the rear fan grill and put in a EKWB FLT120 Pump/Res. Fits perfect. I also swapped the lower 120's for two Noctua 140s. Pros -Riser cable and V-mount -Vents EVERYWHERE -Lower chamber with two fan slots is amazing, blowing air across the card is a plus for rear mounted memory. -Plenty of room for components in the front -Plenty of room for wiring in the back -011D count not V-mount a card if you are using a z690 Apex with the Dimm.2 and a 3090 Kingpin with the LCD on. The Y60 clears up this issue Cons -No replacement cover for the SSD trays. (full M.2 builds will suffer) -Provided screws for the fans going in to the lower chamber are too think of a diameter to my Noctua 140s. Had to find thinner but same threaded screws at HDepot -Not much clearance for the CPU power cables once fans/rad is installed. -The opening for the radiator ports on the top is not big enough for EK Torques. Overall love this case and I am glad i jumped on the wagon. I love the fact that I can use a mid-Sized case but still fill it using high powered components and still get great temperatures was very pleasing. I wish I could submit a picture..

    Ted

  • First PC Build
    5

    I almost returned this case due to the fact I wouldn't be able to add additional pcie express cards that isn't half height. I opted to keep it and just get a new motherboard and start from scratch! I installed an E-ATX motherboard, it's a tight fit but I still managed to get my cables well managed no problem. Great Design and Great Value! Thanks Hyte!

    Dean

  • Refreshing
    5

    This case is very refreshing, I had some trouble finding an apealing case that would also work well with my two fan radiator. It was between this and Lian Li o11 dynamic but opted for this and I dont regret it, its great for unique builds. And it comes with a riser at $200! sold.

    Luke Tompkins

  • Good, Different!
    5

    Very different from every other case on the market. Like the 45 glass that I haven't seen with any other case. Nice design can fit a bunch of fans and has more than enough space and cable routing throughout. Very pleased with my pre-order!

    Mark

HYTE Store,HYTE Store/PC Cases,HYTE Store/PC Cases/ATX-Case

Y60

Modern Aesthetic Case

$199.99
13
Free ground shipping in the continental United States. For orders outside US and Canada, please click here to find a retailer.
{"white": "June 30, 2022", "red": "August 31, 2022"}
Qty:
Adding to cart… The item has been added